Nano Hair Steamer Spray Machine 1200W Blue Light

Product Description:

★the Blue Nano Sprayer Uses a Superheated Steam Generator to Vaporize Liquid Water into a Single Water Molecule with a Diameter of About 0.26 Nanometers.
★This Nano-water Molecule with Latent Heat Energy Can Smoothly Penetrate Through the Hair Scales with a Gap of About 1 Nanometer, and Directly Reach the Interfilling Material Between the Fiber Bundles in the Hair, and Supplement the Hair with Moisture, Nutrition, and the Introduction of Dyes and Irons. the Purpose of Repairing Hair and Enhancing the Effect of the Drug Reaction.
★Nano Atomization Nourishes the Media, Hair Keratin and Fibrous Tissue During the Conduction Process, and Absorbs Nano Energy and Converts It into Heat Energy.
★It Can Increase the Kinetic Energy of Amino Acids and Carbohydrate Compounds, Lipids, and Proteins in the Plasma Cell Membrane, Increase the Temperature of the Hair, and Expand the Pores of the Epidermis, Thereby Facilitating the Diffusion and Absorption of Care Products Through the Epidermal Layer.
★the "Warming Effect" Produced by It Can Activate Tissue Cells, Strengthen the Repair of Local Keys, and Accelerate the Recovery of Hair Elasticity.

 

 

Features:

Name: Nano Blue Sprayer
Voltage: 110v/60hz
Power: 1200w
Packing Size: 41*25*21cm

 

 

 

 

 

 

1. When Using This Machine, Please Use Pure Water or Distilled Water. It Is Strictly Forbidden to Add Flavor Liquids or Use Tap Water, Which Will Cause Blockage Inside the Machine and Seriously Affect the Service Life of the Machine.
2. Turn on the Power and Turn on the Power Switch. the Mist Outlet of the Nano-sprinkler Must Face the Ground, Not People and Electrical Equipment, so As to Avoid Unnecessary Damage. Depending on the Water Temperature, the Waiting Time for Spraying the Mist Is Different. Normal Temperature Water Generally Waits for 1-2 Minutes.
3. the Indicator Light Is on and Spraying Starts. Note That the Spray Port Should Not Be Too Close to Human Skin, so As to Avoid the High Temperature Mist from Harming People.


Maintenance and Cleaning Instructions
Be Sure to Clean the Internal Pipes of the Machine Every 30 Hours of Use to Prevent the Pipes from Being Blocked.

The Cleaning Method:
1. Pour out the Water in the Water Bottle and Add White Vinegar (White Vinegar Cannot Be Diluted). Then, like the Normal Working Process, Start the Machine, White Vinegar Enters the Machine and Sprays out, Which Means That the Pipe Is Being Cleaned. Wash for at Least 20 Minutes. After Cleaning, You Need to Clean the White Vinegar Left in the Water Bottle of the Machine, and Pour the Bottle of Pure Water, Start the Machine Again, Clean the White Vinegar Left in the Machine, and Spray a Bottle of Pure Water.
2. After Each Use, Turn the Machine to the Maximum Gear, Unscrew the Nozzle to Spray a Pot of Water, Spray the Kettle in the Pipe and Then Turn It off to Avoid Residual Scale.

Precautions
Water Bottles Need to Use Soft Water. (Such As Purified Water, Distilled Water, Etc.), Hard Water Is Not Allowed, (Such As: Tap Water, Well Water, Mountain Spring Water, Etc. No Additives Can Be Added to the Water.) After Each Operation, the Water Bottle Must Be Filled with Water. If There Is No Water in the Water Bottle, the Machine Will Emit a (Ticking Ticking) Sound. This Sound Indicates That the Internal Motor Is Short of Water. Please Turn off Immediately and Fill the Water Bottle with Water.

 

 

Statement (Fda, Artg)
The Sale of This Item May Be Subject to Regulation by the U.s. Food and Drug Administration and
State and Local Regulatory Agencies. If the Item Is Subject to Fda Regulation,
I Will Verify Your Status As an Authorized Purchaser of This Item Before Shipping of the Item.
If You Have Questions About Legal Obligations Regarding Sales of Medical Devices,
You Should Consult with the Fda's Center for Devices and Radiological Health:
Https://www.fda.gov/cdrh/devadvice/
Https://www.fda.gov/cdrh/industry/support/index.html
Thank You for Your Cooperation.